5. Insert the plug in the filler port.
6. Close the access door or fit the panel.
Further information See chapter 2.7.1.1 for suitable oil grade and volume.
10.13.2 Option da
Centrifugal separator maintenance
Clean the cyclone separator dirt trap if the moisture content in the compressed air is too high.
Material Cleaning cloths
Wrench
Small screwdriver
Dirt trap maintenance kit
Petroleum ether or spirit
Precondition The machine is switched off.
The machine has cooled down.
The machine is fully vented, the pressure gauge reads 0psig.
All compressed air consumers are disconnected and the air outlet valves are open.
The «battery isolating switch» is turned off.
Fig. 69 Cleaning the condensate drain
1
Centrifugal separator
2
Dirt trap
3
Condensate drain hose
4
Screw plug
5
O-ring
6
Strainer
7
Union nut condensate drain hose
8
Nozzle
9
Dirt trap housing
➤ Remove both front panels.
Cleaning the dirt trap
1. Unscrew the plug
4
and remove the strainer.
2. Twist the union nut
7
and detach the condensate drain hose
3
from the dirt trap
10 Maintenance
10.13 Maintenance for Optional Items
No.: 901779 08 USE
Operator Manual Portable Rotary Screw Compressor
MOBILAIR M58utility SIGMA CONTROL SMART
153