KAESER KOMPRESSOREN MOBILAIR M58utility, Operator'S Manual

Page: 103 / 254

Alarm codes, range 3300 – 3399 “Controller warnings”:
Code Meaning Remedy See
chapter
Where can I get help?
SW
KS
3303 Warning - PLC tempera‐
ture high
Check operating condi‐
tions.
Allow the machine to cool
down.
5.2 – –
3313 Warning - HMI tempera‐
ture high
Check operating condi‐
tions.
Allow the machine to cool
down.
5.2 – –
SW = Specialized workshop; KS = KAESER SERVICE
PLC - Programmable logic controller; HMI = Human-machine interface
Tab. 58 General warning messages and measures
9.3 Evaluating engine faults and alarms
9.3.1 Engine stops or fails to start
Possible cause Action Where can I get help?
SW
KS
«EMERGENCY STOP» push
button activated.
Unlock the
«EMERGENCY STOP» push
button, see chapter 8.2.7.
– –
Starter faulty. Replace starter. X –
Engine electrical fault. Have it epaired/replaced. X –
Fuel tank empty. Fill the fuel tank. – –
Air pockets in fuel line between
fuel tank and injection pump.
Bleed the fuel line, see chap‐
ter 10.4.3.
– –
Fuel filter clogged. Clean or replace, see chap‐
ter 10.4.3.
– –
Fuel line broken. Have it replaced. X –
Control fuse or relay fault. Have it checked. Replace if nec‐
essary.
X X
Airend discharge temperature
too high.
Perform check. – X
SIGMA CONTROL SMART con‐
troller faulty.
Arrange for it to be repaired/
replaced.
– X
Electrical connections and/or ca‐
bles loose or broken.
Tighten. Replace cables if nec‐
essary.
X –
Battery faulty or charge too low. Maintain battery, see chap‐
ter 10.9.
– –
SW = Specialist Workshop; KS = KAESER SERVICE
9 Fault Recognition and Rectification
9.3 Evaluating engine faults and alarms
No.: 901779 08 USE
Operator Manual Portable Rotary Screw Compressor
MOBILAIR M58utility SIGMA CONTROL SMART
91