JVC GY-LS300CHE, Instructions Manual

Page: 27 / 188

Adjusting the Grip Belt
Open the pad and adjust the position of the grip belt
accordingly.
.
Caution :
0
If the grip is loose, the camera recorder may fall
off resulting in injuries or malfunction.
Attaching the Supplied Microphone
O
You can attach the supplied microphone to the
microphone holder.
The supplied microphone uses a phantom power
supply.
.
4
5
1, 3
2
1
Turn the knob on the microphone holder
counterclockwise to loosen and open the
microphone holder.
2
Place the microphone in the microphone
holder.
3 Turn the knob on the microphone holder
clockwise to secure the microphone.
4
Connect the microphone cable to the
[INPUT1] or [INPUT2] terminal.
5 Pin the microphone cable to the clamp.
6
Perform the settings for the phantom mic
correctly.
(
A
P66 [Audio Recording] )
Attaching the Tripod
Use the screw hole at the bottom of this camera
recorder.
(3/8×16UNC, 1/4×20UNC)
Use the screw hole that suits the tripod.
To prevent the camera recorder from falling off,
which may result in injuries or damages, read the
“INSTRUCTIONS” of the tripod to be used and
make sure that it is securely attached.
.
o
Bottom
Caution :
0
Use the tripod on a stable surface.
0
To prevent the camera recorder from falling,
attach securely using the rotation prevention
hole.
0
Use screws with screw length 5 mm and below.
Settings and Adjustments Before Use
27
Pr
ep
ar
ati
ons