JVC GY-LS300CHE Instructions Manual Download

Page: 179 / 188

Symptom

Action

The time code and user’s bit

are not displayed.

Even in Camera mode or Media mode, the time code and user’s bit

may not be displayed depending to the type of display.

Is [LCD/VF]

[Display Settings]

[TC/UB] set to “Off”? To display

the time code or user’s bit, set it to “TC” or “UB”.

(

P109 [ TC/UB ] )

The date and time are not

displayed.

The date and time are only displayed on the Display 1 and Display 2

screens in the Camera mode (during shooting).

(

P129 [Display Screen in Camera Mode] )

Is [System]

[Record Set]

[Time Stamp] set to “On”? To display

the date and time, set it to “Off”.

(

P119 [ Time Stamp ] )

Incorrect display on the

viewfinder.

Is [LCD/VF]

[VF SW] set to “Enable”, and is the viewfinder in use

without being pulled out?

To use the viewfinder in this setting, pull out the viewfinder.

(

P106 [ VF SW ] )

The actual recording time is

shorter than the estimated

time.

The recordable time may be shorter depending on the shooting

conditions or the subject.

Cannot connect to wireless

LAN.

Check the mode of connection and method of setting ([SSID] and

[Passphrase] in cases other than WPS).

(

P146 [Connecting via Wireless LAN] )

Even if the Passphrase is wrong, “Completed the Setup Wizard.

Please Input the Passphrase into Your Device.” may appear at the

browser setting depending on the type of encryption.

Adjust [Passphrase] again.

The View Remote screen turns

black.

The screen flickers.

The screen freezes.

Cannot perform remote

operation.

The network path is congested.

Wait a while before refreshing (reloading) the web browser.

The clips cannot be uploaded

to the FTP server.

Adjust the [Clip Server] settings.

(

P124 [ Clip Server ] )

The maximum size of the recorded clip is 64 GB.

If a file size limit is set in the FTP server settings, set the size limit to

more than 64 GB.

Take necessary action as described in “[List of FTP Transfer Errors]

(

P 174)”.

The wireless LAN is

disconnected.

The wireless LAN may be disconnected depending on the

environment. Change the usage environment.

Connect via wired LAN.

(

P148 [Connecting via Wired LAN] )

The images and audio sound

during live streaming are

choppy.

Depending on the type of network adapter used and the connection,

streaming may not be possible with the encoding bit rate specified.

Please reduce the encoding bit rate.

The focus position cannot be

changed using the camera unit

during manual focus when

using a lens without a focus

ring.

Setting [Main Menu]

[Camera Function]

[Grip Zoom] to “Focus”

enables focusing using the zoom lever at the grip.

(

P98 [ Grip Zoom

] )

Troubleshooting

179

Others

Summary of Contents for GY-LS300CHE





























































































































































































Search results

Summary of Contents for GY-LS300CHE

Reviews:

Related manuals for GY-LS300CHE

Brands by name

Popular brands

JVC GY-LS300CHE, Instructions Manual

Search results

Summary of Contents for GY-LS300CHE

Reviews:

Related manuals for GY-LS300CHE

Brands by name

Popular brands