JVC GY-LS300CHE, Instructions Manual

Page: 45 / 188

Basic Shooting
Procedures
Preparations
.
1
3
4
4
2
1
Supply battery or AC adapter power to the
camera recorder.
(
A
P28 [Power Supply] )
2
Insert an SD card.
(
A
P39 [SD Card] )
3
Turn on the power of the camera recorder.
Hold down the lock button (blue) at the center of
the [POWER ON/OFF] switch to set to “ON”. The
camera recorder starts up in Camera mode and
is ready for recording.
4 Adjust the angle of the LCD monitor and
viewfinder.
(
A
P36 [Adjusting the LCD Monitor and
Viewfinder] )
Shooting
You can set to “FULL”, “PRESET” or “OFF” using
the [AUTO MODE FULL/PRESET/OFF] switch.
0
When “FULL” is specified, the following video
items are automatically adjusted. (Auto mode)
0
Iris
0
Gain
0
Shutter
0
White balance
The audio recording level is also set to Auto in
the factory default, and audio from the built-in
microphone is recorded.
Specify whether or not to set the audio to Auto
in [Main Menu]
B
[A/V Set]
B
[Audio Set]
B
[Audio On FULL AUTO].
(
A
P114 [ Audio On FULL AUTO ] )
0
When “PRESET” is specified, the settings
selected in [PRESET AUTO] is used.
(
A
P101 [PRESET AUTO Item] )
0
When “OFF” is specified, the button settings,
switch settings and selections in the menu are
used.
Memo :
0
To set each individual video setting item
automatically or manually, and to carry out the
audio input settings and the audio recording
level adjustment, refer to the following.
0
[Adjusting the Brightness] (
A
P 55)
0
[Adjusting the Iris
F
] (
A
P 56)
0
[Setting the Gain] (
A
P 58)
0
[Setting the Electronic Shutter] (
A
P 59)
0
[Adjusting the White Balance] (
A
P 61)
0
[Selecting Audio to Be Recorded in Each
Channel
O
] (
A
P 66)
0
[Adjusting the Audio Recording Level
O
]
(
A
P 67)
Basic Shooting Procedures
45
Sh
ooting