User Switch Set Item
USER1 to USER10, LCD KEY▲/LCD
KEY▶/LCD KEY▼/LCD KEY◀
By assigning one of the following functions to each
of the [F.ASSIST/1], [TC/2], [LOLUX/3],
[C.REVIEW/4], [ZEBRA/5], [MARKER/6], [REC/7],
[EXPANDED FOCUS/8], [AWB/9] and [LOCK/10]
buttons or the cross-shaped buttons on the LCD
monitor, these buttons can be used to control the
assigned function (on/off, start, switch).
Set according to the shooting conditions. Usable
only in the Camera mode.
[Setting Values: Live Streaming, Load Picture File,
TC Preset, Clip Review, OK Mark, Clip Cutter Trig,
Backup Trig, Rec, LCD Backlight, Expanded
Focus, Focus Assist, Marker, Zebra, AWB, White
Balance, Preset Zoom3, Preset Zoom2, Preset
Zoom1, Push AF/AF Lock, One Push Iris, OIS,
Face Detect, AE/FAW Lock, Lolux, Bars, None]
Memo :
0
“Rec” can only be assigned to the [REC/7],
[EXPANDED FOCUS/8] and [AWB/9] buttons.
0
Some assigned functions cannot be used
depending on the lens used.
Functions that cannot be used will be grayed out
on the user button functions page of the status
screen.
Lolux
To increase the sensitivity when in dim
surroundings, set a value in the Lolux mode.
0
When [Main Menu]
B
[LCD/VF]
B
[Display
Settings]
B
[Gain] is set to “dB”:
[Setting Values: 36dB,
R
30dB]
0
When [Main Menu]
B
[LCD/VF]
B
[Display
Settings]
B
[Gain] is set to “ISO”:
[Setting Values:
R
ISO 12800, ISO 25600]
Clip Review
For specifying the operation when any of the
[USER1]-[USER10], [LCD KEY▲], [LCD KEY▶],
[LCD KEY▼], or [LCD KEY◀] items is set to “Clip
Review”.
0
Last 5sec:
Views about 5 seconds of the clip from the
ending.
0
Top 5sec:
Views about 5 seconds of the clip from the
beginning.
0
Clip:
Views the entire clip.
[Setting Values:
R
Last 5sec, Top 5sec, Clip]
Face Detect
F
For specifying the operation when any of the
[USER1]-[USER10], [LCD KEY▲], [LCD KEY▶],
[LCD KEY▼], or [LCD KEY◀] items is set to “Face
Detect”.
Select the control to track results of face detection.
0
AF&AE:
Sets auto focus and exposure control for the
face that is being tracked.
0
AF:
Sets auto focus for the face that is being tracked.
[Setting Values:
R
AF&AE, AF]
P54 [Adjusting the Focus by Face Detection
Memo :
0
Face detection does not function when the “MF”
mode is enabled using the [AF/MF] selection
button.
0
When “AF” is specified, this function will be
activated only when the “AF” mode is enabled
using the [AF/MF] selection button.
0
When “AF&AE” is specified, this function will
operate when the “AF” mode is enabled using
the [AF/MF] selection button, and when one or
more of the items (Gain, Iris and Shutter) is set
to Auto mode.
9
Sensitivity
For setting the level of ease of face detection.
[Setting Values:
R
High, Middle, Low]
9
Hysteresis
For setting the margin to maintain status when the
face that is being tracked is lost.
Set to “Fast” to select another object immediately
if the face on the screen is lost.
Set to “Slow” to operate at the same position for
some time even if the face on the screen is lost.
[Setting Values: Fast,
R
Middle, Slow]
Camera Function Menu
99
Menu
Display and
D
etailed
S
etti
ngs
Summary of Contents for GY-LS300CHE
Page 2: ...2 ...
