JVC GY-LS300CHE Instructions Manual Download

Page: 121 / 188

Live Streaming

Starts live distribution when “On” is selected.

[Setting Values: On,

Off]

Memo :

“On” cannot be selected if network connection

is not established.

“On” cannot be selected when FTP is running.

Live streaming switches to “Off” when the power

is turned off.

Server

For selecting the server for live streaming.

[Setting Values:

Server1, Server2, Server3,

Server4]
Memo :

The setting cannot be changed during live

streaming (Live Streaming set to “On”).

Streaming Server

For setting the server for live streaming.
Memo :

The setting cannot be changed during live

streaming (Live Streaming set to “On”).

Server1/Server2/Server3/Server4

* The name that is set in [Alias] is displayed

individually.

Alias

For setting a name to distinguish the settings of

this camera recorder.

The name set in this item will be displayed in the

[Server] options.

* The default value is “Server1/Server2/Server3/

Server4”.

* You can enter up to 31 characters and ASCII

characters.

Type

For setting the system to transfer videos for

distribution.

[Setting Values:

MPEG2-TS/UDP, MPEG2-

TS/TCP, RTSP/RTP, ZIXI, RTMP]

Memo :

Use reception devices that are compatible with

the respective transfer systems.

To use the “ZIXI” setting, a dedicated server is

needed separately.

The following items that can be set vary

depending on the setting of this item.

Destination Address

For setting details such as the host name and

the IP address of the live distribution destination.

* Enter not more than 127 characters using

single-byte alphanumeric characters (a to z, 0 to

9), single-byte hyphen [-], or dot [.].

Destination URL

For entering the URL of the live distribution

destination beginning with “rtmp://”.

There is no default value (blank).

* You can enter up to 191 characters and ASCII

characters.

Destination Port

Enter the network port number of the live

distribution destination using an integer

between 1 and 65535.

When [Type] is set to “MPEG2-TS/UDP” or

“MPEG2-TS/TCP”, the default value is “6504”. If

“ZIXI” is set, the default value is “2088”.

Stream ID

For setting the registered stream ID of the live

distribution destination.

The default value varies with the product model.

* Enter not more than 63 characters.

Stream Key

Enter the stream key specified at the live

transmission destination.

There is no default value (blank).

* Enter not more than 63 characters.

Password

For setting the [Stream ID] password.

There is no default value (blank).

* Enter not more than 127 characters. Enter not

more than 31 characters for RTSP/RTP setting.

Latency

For setting the latency mode.

[Setting Values: Minimun(ZIXI Off),

Low,

Medium]

System Menu

121

Menu

Display and

etailed

etti
ngs

Summary of Contents for GY-LS300CHE





























































































































































































Search results

Summary of Contents for GY-LS300CHE

Reviews:

Related manuals for GY-LS300CHE

Brands by name

Popular brands

JVC GY-LS300CHE, Instructions Manual

Search results

Summary of Contents for GY-LS300CHE

Reviews:

Related manuals for GY-LS300CHE

Brands by name

Popular brands