JVC GY-LS300CHE, Instructions Manual

Page: 67 / 188

Adjusting the Audio Recording Level
O
You can select to adjust the audio recording levels for
the two channels (CH1/CH2) manually or automatically.
.
Manual Adjustment Mode (Manual Adjustment)
0
Set the [AUDIO SELECT CH-1/CH-2 AUTO/
MANU] switch on the camera recorder to “MANU” to
enter the manual adjustment mode, and use the
[CH-1]/[CH-2] recording level adjustment knob to set
the recording level.
0
You can adjust the level manually during the
recording, recording standby, and stop modes.
Memo :
0
When the [AUTO MODE FULL/PRESET/OFF]
switch is set to “FULL” or “PRESET”, and [Main
Menu]
B
[A/V Set]
B
[Audio Set]
B
[Audio On FULL
AUTO] is set to “Auto”, the [AUDIO SELECT CH-1
AUTO/MANU]/[AUDIO SELECT CH-2 AUTO/
MANU] switch is disabled.
(The above setting is the factory default.)
o
Setting Input Channel to “INPUT1”/“INPUT2”
1
Set the [AUDIO SELECT CH-1/CH-2 AUTO/
MANU] switch to “MANU” for the channel to be
adjusted manually.
2
Turn the corresponding [CH-1]/[CH-2]
recording level adjustment knob to adjust the
level.
Adjust such that the audio level meter does not light
up at -2 dB even for loud sounds.
(
A
P112 [ Limiter Mode ] )
.
1/ 100
F1. 6
18
dB
AE + 6
ND 1 /16
12 :34 : 56
Jan 24 , 2015
00: 00: 00.00
4030 20 10 0
5 . 6f t
P 15000K
4030 20 10 0
-2dB
o
When the input channel is set to “INT” for both
[CH1] and [CH2]
1
Set the [AUDIO SELECT CH-1 AUTO/MANU]
switch to “MANU”.
2
Turn the [CH-1] recording level adjustment
knob to adjust the level.
When the built-in microphone and the [AUX] input
terminal are used, the recording levels of [CH1] and
[CH2] are interlocked.
This is also effective when the [AUDIO SELECT
CH-1 AUTO/MANU] switch is set to [CH2].
Memo :
0
Select [Limiter Mode] or [Int. Mic Stereo Enhancer]
in the menu to set the recording audio.
0
For the reference level to be recorded to an SD card,
set [Main Menu]
B
[A/V Set]
B
[Audio Set]
B
[Ref.
Level] to “-20dB”, “-18dB”, or “-12dB”. (common for
CH1/CH2)
(
A
P112 [ Ref. Level ] )
0
The operations of the [CH-2] recording level
adjustment knob and [AUDIO SELECT CH-2 AUTO/
MANU] switch are disabled.
0
When [Main Menu]
B
[A/V Set]
B
[Audio Set]
B
[CH1 INT] and [CH2 INT] are set to “Int. Mic L” and
“AUX R” respectively, or set to “Int. Mic R” and “AUX
L” respectively, the settings of the [AUDIO SELECT
CH-1 AUTO/MANU] and [AUDIO SELECT CH-2
AUTO/MANU] switches become independent. In
this case, the recording level settings of CH1 and
CH2 are also independent.
Automatic Adjustment Mode
0
Set the [AUDIO SELECT CH-1/CH-2 AUTO/
MANU] switch to “AUTO” or the [AUTO MODE
FULL/PRESET/OFF] switch to “FULL” to enter
Automatic Adjustment mode. The audio recording
level is set automatically according to the input level.
0
When the [AUTO MODE FULL/PRESET/OFF]
switch is set to “FULL”, mode switching with the
[AUDIO SELECT CH-1/CH-2 AUTO/MANU] switch
is disabled.
Audio Recording
67
Sh
ooting