2
Save the current zoom position.
0
Press any of the user buttons assigned with
the “Preset Zoom1”, “Preset Zoom2”, or
“Preset Zoom3” function for more than 1
second.
0
The current zoom position will be stored.
3
Recall the stored zoom position.
0
Press any of the user buttons assigned with
the “Preset Zoom1”, “Preset Zoom2”, or
“Preset Zoom3” function and release within 1
second.
0
The camera recorder zooms to the stored
zoom position.
Memo :
0
The zoom speed to the zoom position can be set
in [Main Menu]
B
[Camera Function]
B
[User
Switch Set]
B
[Preset Zoom Speed].
0
Operating other zoom maneuvers during a
zoom position recall will cancel the recall.
0
Depending on the lens used, the zoom position
that was recalled may be different from the
position stored.
Focus Operation
F
.
Adjusting Focus Automatically
1
Press the [AF/MF] selection button to set to
Auto Focus mode.
The auto focus icon
e
appears on the screen.
Memo :
0
If [Main Menu]
B
[Camera Function]
B
[AF
Assist] is set to “Far/Near”, you can shift the auto
focus point using manual focusing operation
while in the automatic focus adjustment mode.
0
When face detection is enabled, the Auto Focus
icon
e
appears with the face mark.
P54 [Adjusting the Focus by Face
0
If there is an AF/MF switch on the lens used, set
the switch to MF to disable Auto Focus. Even if
the switch is set to AF, the focus cannot be
automatically adjusted depending on the lens.
One Push Auto Focus
If [Push AF/AF Lock] is assigned to the user button,
pressing the assigned user button (within 1 minute)
while in the Manual Focus mode makes the camera
recorder focus on the center of the frame
automatically.
Memo :
0
Face detection does not work during One Push
Auto Focus.
0
AF Assist does not function.
0
When the operation is complete, the camera
recorder returns to the Manual Focus mode
automatically.
0
One Push Auto Focus functions with emphasis
on the focusing speed. This function is not
suitable during recording.
Zoom Operation
F
51
Sh
ooting
Summary of Contents for GY-LS300CHE
Page 2: ...2 ...