JVC GY-LS300CHE Instructions Manual Download Page 187

Page: 187 / 188

Important Notice

concerning the Software

Software License Attached to the Product :

The Software embedded in the Product is composed

of several independent software components, and in

each of such individual components (hereinafter the

“Licensed Software”), a copyright of either

JVC

KENWOOD Corporation (hereinafter “JKC”) or

a third party subsists.

The Product uses the software component

designated in the End-User License Agreement that

was executed between JKC and a third party

(hereinafter “EULA”).

The Licensed Software covers those corresponding

to free software, and, as a condition of distribution of

the software component in executable format which

is based on the license granted under the GNU

General Public License or Lesser General Public

License (hereinafter “GPL/LGPL”), it requires an

availability of the source code for the relevant

component. Please refer to the following URL

concerning the distribution of the source code;

http://www3.jvckenwood.com/english/

download/gpl/index.html

Please note that we are unable to answer any inquiry

relating to the contents, etc. of the source code. In

addition, the Licensed Software includes the

software developed or created independently by

JKC and there exists an ownership of JKC in such

software and any accompanying documents, which

is protected by the Copyright Law, any international

treaties and other applicable laws. As to matters

concerning the handling by JKC of the software

components, please refer to the “Software License

Agreement” attached hereto. Please note that any

software component licensed under “EULA” which

is not subject to “GPL/LGPL”, and those developed

or created independently by JKC shall not be subject

to the requirement for provision of the source code.

The software component distributed under “GPL/

LGPL” shall be licensed to users without charge,

and, therefore, no warranty is given for such software

component, either express or implied, within the

scope of the applicable laws and regulations. Unless

otherwise permitted by applicable laws and

regulations or agreed in written form, none of the

owners of the copyright or persons entitled to alter or

redistribute the software component under the said

license shall have any liability for any type of damage

or loss resulting from the use of or inability to use

such software component. For further details of the

conditions of use of such software component or

matters required to be complied with, please refer to

the relevant “GPL/LGPL”.

Users are urged to read the details for the relevant

license carefully before using the software

component covered by “GPL/LGPL” and embedded

in the Product. Since the terms and conditions of

individual licenses are provided by parties other than

JKC, the original English version will be displayed by

the Product.

Turn on the power.

Press the [MENU/THUMB] button.

Select [Main Menu]

[System]

[System

Information]

[Open Source License].

Important Notice concerning the Software

187

Others

Summary of Contents for GY-LS300CHE





























































































































































































Search results

Summary of Contents for GY-LS300CHE

Reviews:

Related manuals for GY-LS300CHE

Brands by name

Popular brands

JVC GY-LS300CHE, Instructions Manual

Search results

Summary of Contents for GY-LS300CHE

Reviews:

Related manuals for GY-LS300CHE

Brands by name

Popular brands