JVC GY-LS300CHE Instructions Manual Download Page 116

Page: 116 / 188

System Information

Version(Camera)

Displays the version of the color firmware.

Display example : 0000-0000

Version(Lens)

The version of the lens is displayed on the upper

row and the accessory version is displayed on the

lower row.

Display example : 0.0

0.0

Memo :

If the version of the lens cannot be obtained, this

item is not displayed.

If the accessory version cannot be obtained, the

lower row is not displayed.

Fan Hour

For displaying the usage time of the internal fan.
Memo :

Under normal environment, dust will

accumulate on the internal fan when the camera

recorder is used over a long period. Dust may

enter the camera recorder especially if it is used

outdoors. This may affect the image and sound

quality of the camera recorder. Check and

replace the fan after every 9000 hours

(suggested guideline).

Open Source License

Displays the license for the open source software

used by this camera recorder.

Record Set Item

Record Format

After setting of all items in the [Record Format]

menu is complete, select [Set] at the bottom of the

screen to apply the new settings on the camera

recorder and switch the recording format. A

“Please Wait...” message appears during

switching.

System

For selecting a system definition.

4K:

Records in “4K” quality for both slots A and B.

HD:

Records in “HD” (High Definition) quality for both

slots A and B.

SD:

Records in “SD” (Standard Definition) quality for

both slots A and B.

HD+Web:

Records in “HD” (high definition) for slot A, and

in resolution suitable for web distribution for slot

[Setting Values: 4K,

HD, SD, HD+Web]

Caution :

The selectable options for the [

Format],

[

Resolution], [

Frame Rate], and [

Bit Rate]

settings vary depending on the setting of this

item.

Format

For selecting the format of the file to be recorded to

the SD card in slot A.

QuickTime:

QuickTime file format (.MOV)

AVCHD:

AVCHD file format

[Setting Values:

QuickTime, AVCHD]

Memo :

When [System] is set to “4K”, this item is fixed at

“QuickTime”.

Resolution

For selecting the image size to be recorded to the

SD card in slot A. (Horizontal x vertical)

The available options vary according to the

[System] and [

Format] settings.

When [System] is set to “4K”:

Fixed at “3840x2160”.

When [System] is set to “HD” or “HD+Web”, and

[

Format] is set to “QuickTime”:

[Setting Values:

1920x1080, 1280x720]

When [System] is set to “HD” or “HD+Web”, and

[

Format] is set to “AVCHD”:

Fixed at “1920x1080”.

When [System] is set to “SD”:

Fixed at either “720x480” or “720x576”.

Memo :

The selectable values of [

Frame Rate] and

[

Bit Rate] vary according to the setting of this

item.

116

System Menu

Menu

Display and

etailed

etti
ngs

Summary of Contents for GY-LS300CHE





























































































































































































Search results

Summary of Contents for GY-LS300CHE

Reviews:

Related manuals for GY-LS300CHE

Brands by name

Popular brands

JVC GY-LS300CHE, Instructions Manual

Search results

Summary of Contents for GY-LS300CHE

Reviews:

Related manuals for GY-LS300CHE

Brands by name

Popular brands