JVC GY-LS300CHE Instructions Manual Download Page 50

Page: 50 / 188

Zoom Operation

Adjusts the angle of view.

Zooming can be operated using any of the three

levers/rings below.

Zoom Lever at the Grip

Zoom lever at the Handle

Zoom ring on the commercially available lens

During the zoom operation, the zoom bar or

number will appear on the upper right corner of the

screen.

(

P132 [Zoom Display] )

Caution :

Depending on the zoom speed, the zoom drive

noise of the power zoom may be recorded.

Using the Zoom Lever at the Grip

Press the zoom lever to zoom.

The zoom speed changes according to the

extent the zoom lever is being pushed.

Zooms into wide angle and increases the

angle of view when “W” is pressed.

Zooms into telephoto and decreases the

angle of view when “T” is pressed.

Memo :

The zoom lever at the grip functions with the

power zoom lens. However, if the lens is set to

manual and depending on the lens used, the

zoom lever at the grip may not function.

When using a lens without focus ring, set [Main

Menu]

[Camera Function]

[Grip Zoom] to

“Focus” to enable focusing (in place of the zoom

operation) using the zoom lever at the grip.

(

P98 [ Grip Zoom

] )

Using the Zoom Lever at the Handle

Set the zoom speed individually in [Main

Menu]

[Camera Function]

[Handle

Zoom Speed L]/[Handle Zoom Speed M]/

[Handle Zoom Speed H].

Set the zoom speed for “L”, “M” and “H” of the

[ZOOM L/M/H] zoom speed switch

individually.

Increasing the value increases the zoom

speed.

(

P98 [Handle Zoom Speed L/Handle Zoom

Speed M/Handle Zoom Speed H

] )

Memo :

The zoom lever at the handle is disabled when

“Off” is selected.

The zoom lever at the handle functions with the

power zoom lens. However, if the lens is set to

manual and depending on the lens used, the

zoom lever at the handle may not function.

Set the [ZOOM L/M/H] zoom speed switch

to any of the settings.

Press the zoom lever at the handle to zoom.

The zoom operation is performed in the

speed that has been set.

Using Zoom Ring on the Commercially

Available Lens

You can adjust the preferred angle of view by

turning the zoom ring.

Saving/Recalling Current Zoom

Position (Preset Zoom)

This allows you to register up to three zoom

positions.

Assign the “Preset Zoom1”, “Preset

Zoom2”, or “Preset Zoom3” function to any

of the user buttons.

(

P38 [Assignment of Functions to User

Buttons] )

(

P99 [USER1 to USER10, LCD KEY▲/LCD

KEY▶/LCD KEY▼/LCD KEY◀] )

Zoom Operation

ooting

Summary of Contents for GY-LS300CHE





























































































































































































Search results

Summary of Contents for GY-LS300CHE

Reviews:

Related manuals for GY-LS300CHE

Brands by name

Popular brands

JVC GY-LS300CHE, Instructions Manual

Search results

Summary of Contents for GY-LS300CHE

Reviews:

Related manuals for GY-LS300CHE

Brands by name

Popular brands