VC10 Professional – Operations Manual
26
1. NAV 1 frequency knob
2. NAV 1 active/standby swap switch
3. COM 1 frequency knob
4. COM 1 active/standby swap switch
5. ADF 1 100MHz increment/decrement knob
6. ADF 1 10MHz increment/decrement knob
7. ADF 1 1MHz increment/decrement knob
8. TACAN (non-functional in this simulation) – MANUAL knobs are used to control the transponder code
9. Transponder code
10. Autopilot master (power) switches
11. Yoke hide/show toggle switch
12. Aileron trim levers – rotate using left-click and hold or right-click and hold. Springs back to the centre upon
release of the mouse buttons.
13. Rudder trim knob
14. Flight deck intercom interconnect switch
15. Supernumerary dimmer knob
16. Electrical ram air turbine (ELRAT) selector lever
17. HP cock levers
18. Stall protection system dump valve lever
19. NAV 2 frequency knob
20. NAV 2 active/standby swap switch
21. COM 2 frequency knob
22. COM 2 active/standby swap switch
23. ADF 2 100MHz increment/decrement knob
24. ADF 2 10MHz increment/decrement knob
25. ADF 2 1MHz increment/decrement knob
Summary of Contents for Standard VC10
Page 1: ...OPERATIONS MANUAL ...
Page 96: ...www justflight com ...