Just Flight Standard VC10, Operation Manual

Page: 16 / 96

VC10 Professional – Operations Manual
16
Front panel – centre
1. No.1 autopilot indicator lights (top to bottom):
- Glideslope engaged – illuminates when glideslope capture has occurred
- Glideslope armed – illuminates when glideslope capture is armed
- Autopilot failure – illuminates when the autopilot has disengaged
2. No.1 autopilot three-axis trim indicator – displays the rudder, aileron and elevator trim positions
3. Flight steering computer mode switch
4. IFF warning light
5. Compass change-over switch – true or magnetic heading
6. Standby altimeter
7. Standby artificial horizon
8. Ice detector light
9. Outside air temperature gauge
10. Warning lights – amber alert light
11. Engine fire warning and fire suppression handles – right-click for bottle 1 and left-click for bottle 2
12. High pressure RPM indicators
13. Red engine failure lights and amber engine reverser lights (engine 1 and engine 4 only)
14. Auto-trim error lights
15. Slat position indicator (port side)
16. Flap position indicators (port side)
17. Flap position indicators (starboard side)
18. Slat position indicator (starboard side)
19. Tailplane indicator gauge (elevator trim) – the white indicates the normal trim range used during take-off
20. Feel failure warning lights (top two) and power controls failure lights
21. DME read-out – displays the distance to the VOR DME tuned into either NAV 1 or NAV 2, depending on the
position of the LOC/VOR change-over switch
22. G-meter
23. G-meter reset switch
24. Aileron upset switches and indicators
25. Aileron trim indicator
26. True outside air temperature gauge
27. Undercarriage standby raise selector switch
28. Undercarriage selector lever
29. Undercarriage door warning lights – illuminate when gear is in transit
30. Undercarriage position indicator
31. Warning lights
32. No.2 autopilot three-axis trim indicator
33. No.2 autopilot indicator lights (top to bottom):
- Glideslope engaged
- Glideslope armed
- Autopilot failure
34. INS 1 CDU