/usr/netscreen/GuiSvr/utils/xdbExporter.sh /var/netscreen/GuiSvr/xdb
/var/netscreen/GuiSvr/csvfile.txt
4.
Use FTP to copy
csvfile.txt
to a common location.
On the NSM appliance:
1.
Use the
nsm_setup
utility to:
a.
Change the IP address, netmask, and gateway of the NSM appliance server to
those of the Solaris server, if you need to use the same IP configuration in
NSMappliance.
b.
Perform a clean installation of the latest release of NSM on the NSM appliance,
or install the same release you installed on the Solaris server.
NOTE:
The version of NSM on the NSM appliance server and the Solaris
server must match exactly.
2.
Use FTP to copy the
csvfile.txt
to
/var/netscreen/GuiSvr
.
3.
Log in as an nsm user by entering the following command, and then enter the admin
password:
sudo su – nsm
4.
Stop the HaSvr, GuiSvr, and DevSvr processes with the following commands:
/usr/netscreen/HaSvr/bin/haSvr.sh stop
/usr/netscreen/GuiSvr/bin/guiSvr.sh stop
/usr/netscreen/DevSvr/bin/devSvr.sh stop
5.
Run Importer using the following command:
/usr/netscreen/GuiSvr/utils/xdifImporter.sh /var/netscreen/GuiSvr/csvfile.txt
/var/netscreen/GuiSvr/xdb/init
6.
Run
xdbViewEdit
using the following command. Set the path of vi editor to
/bin/vi
:
/usr/netscreen/GuiSvr/utils/.xdbViewEdit.sh
CAUTION:
You are about to edit your database. Editing errors could corrupt
your data. The commands you will use are the same as in the vi editor. If
you are not familiar with vi, get assistance.
7.
Change the IP address in the server table to that of the NSM appliance: Option
70.server.00.server.1
[nsm@NSMXpress ~]$ /usr/netscreen/GuiSvr/utils/.xdbViewEdit.sh
Start XDB View Editor in read-only mode? [y]/n: n.
.
.
Please enter path to editor [/usr/bin/vi]: /bin/vi
xdb editor set to /bin/vi
Hit ENTER or return to continue...
Copyright © 2010, Juniper Networks, Inc.
166
Network and Security Manager Installation Guide
Summary of Contents for NETWORK AND SECURITY MANAGER 2010.4 - REV1
