Juniper NETWORK AND SECURITY MANAGER 2010.4 - REV1, Installation Manual

Page: 182 / 244

•
Sets start scripts.
•
Performs postinstallation tasks such as removing the staging directory and starting
the server processes (if configured).
Messages display the installation progress.
After the installation script finishes, it generates a log file with the output of the
installation commands for troubleshooting. The installer indicates the name of the
installation log file and the directory location where it is saved. This file is saved by
default in the
/usr/netscreen/GuiSvr/var/errorLog
subdirectory.
13.
After successful installation, copy the installer file
nsm2010.4_servers_cm.sh
to the
/var/install
directory and enter the following commands:
rm -f NSM-CM
chmod 755 nsm2010.4_servers_cm.sh
ln -s nsm2010.4_servers_linux_cm.sh NSM-CM
Upgrading to NSM 2010.4 Release on an NSM Appliance (Offline Mode)
The section provides instructions on upgrading to NSM 2010.4 on an NSM appliance if
the NSM appliance is not connected to the Internet.
1.
From the NSM Software Download page, click the Regional Server upgrade link to
download the NSM Appliance upgrade software. The downloaded file has the name
nsm2010.4_servers_upgrade_rs.zip
.
2.
From the NSM Software Download page, click the Offline Server upgrade link to
download the NSM Appliance offline upgrade software. The downloaded file has the
name
nsm2010.4_offline_upgrade.zip .
3.
Copy the following files onto your NSM appliance. Download both files to the same
location using FTP or SCP.
nsm2010.4_servers_upgrade_rs.zip
nsm2010.4_offline_upgrade.zip
4.
Log in as the admin user, and answer n when prompted to run the setup wizard.
5.
Enter the following command, and then enter the admin password to gain root access.
sudo su -
6.
Confirm that the
unzip
utility is present on the NSM appliance by entering the following
command:
which unzip
This command returns the location of the unzip utility. If it is not available, the unzip
utility is provided on the NSM Software Download page. Use the following command
to install this utility:
rpm –i unzip-5.51-9.EL4.5.i386.rpm
7.
Navigate to the directory where you saved the downloaded files, which is typically
the
/tmp/
subdirectory.
Copyright © 2010, Juniper Networks, Inc. 160
Network and Security Manager Installation Guide