Juniper NETWORK AND SECURITY MANAGER 2010.4 - REV1, Installation Manual

Page: 170 / 244

Setting permissions for Device Server.......................ok
Upgrade of DevSvr complete.
----- UPGRADING GUI Server -----
Copying data to the installer backup directory..............ok
ok
Upgrading GuiSvr RPM........................................ok
Creating /var/netscreen/dbbackup............................ok
Putting NSROOT into start scripts...........................ok
Installing JRE..............................................ok
Installing GCC..............................................ok
Adding Cfm.log..............................................ok
Adding Cfm.password.........................................ok
Running generateMPK utility.................................ok
Running fingerprintMPK utility..............................ok
Setting permissions for GUI Server..........................ok
Upgrade of GuiSvr complete.
----- UPGRADING HA Server -----
Upgrading HaSvr RPM.........................................ok
Putting NSROOT into start scripts...........................ok
Adding highAvail.isFailOverEnabled..........................ok
Filling in HA Server config file(s).........................ok
Setting permissions for HA Server...........................ok
Upgrade of HaSvr complete.
----- SETTING START SCRIPTS -----
Enabling Device Server start script.........................ok
Enabling GUI Server start script............................ok
Enabling HA Server start script.............................ok
########## PERFORMING POST-INSTALLATION TASKS ##########
ok
Loading GuiSvr XDB data from init files ....................ok
Migrating GuiSvr data.......................................ok
ok
Removing staging directory..................................ok
Starting GUI Server.........................................ok
Starting Device Server......................................ok
Starting HA Server..........................................ok
NOTES:
- Installation log is stored in
/usr/netscreen/DevSvr/var/errorLog/netmgtInstallLog.20080904163031
- This is the GUI Server fingerprint:
9F:8C:02:85:69:74:86:0D:96:84:1C:79:F0:7D:6A:DC:51:A1:81:21
You will need this for verification purposes when logging into the GUI
Server. Please make a note of it.
[root@C73-16 ~]#
Starting Server Processes Manually
If you did not specify the installer to start the servers when finished, then you must
manually start the management system processes. You can start all the management
system processes by starting the HA Server process.
To start the HA Server process manually, enter the following command:
Copyright © 2010, Juniper Networks, Inc. 148
Network and Security Manager Installation Guide