Juniper NETWORK AND SECURITY MANAGER 2010.4 - REV1, Installation Manual

Page: 186 / 244

NOTE: The management system installer indicates the results of its
specific tasks and checks:
• “Done” indicates that the installer successfully performed a task.
• “OK” indicates that the installer performed a check and verified that the
condition was satisfied.
• “FAILED” indicates that the installer performed a task or check, but it
was not successful. See the install log for information about the failure.
This log is usually stored in
/usr/netscreen/DevSvr/var/errorLog
. If the
failure happens in the early stages of installation, the log might be in
/tmp .
The installer then stops any running servers.
10.
Type 1 to specify that you want to upgrade the Central Manager server.
NOTE: If you specify that you want to upgrade the Central Manager, all
data previously configured in the system is restored. If you do not want to
restore your previous configuration data, choose to have the installer
perform a clean install of the Central Manager.
11.
The installer next prompts you to configure additional options specific to your
installation during the upgrade. These options can include:
•
Configuring High Availability
• Configuring backup options
•
Configuring the client download and NBI ports
If applicable, follow the installer prompts to configure these options.
The script next prompts you to restart the servers when the installation is finished.
12.
Type y and press Enter to restart the servers when finished. Type n and press Enter if
you do not want to restart server processes.
The script prompts you to verify your upgrade configuration settings.
13.
Verify your settings. If they are correct, type y and press Enter to proceed. If settings
are incorrect, type n and press Enter to return to the original selection prompt.
The upgrade proceeds automatically. The installer performs the following actions:
• Extracts and decompresses the software payloads.
• Upgrades the Central Manager.
• Installs the HA server.
Copyright © 2010, Juniper Networks, Inc. 164
Network and Security Manager Installation Guide