Juniper NETWORK AND SECURITY MANAGER 2010.4 - REV1, Installation Manual

Page: 89 / 244

########## GENERAL SERVER SETUP DETAILS ##########
Will this machine participate in an HA cluster? (y/n) [n]>
########## DEVICE SERVER SETUP DETAILS ##########
The Device Server stores all of the user data under a single directory.
By default, this directory is /var/netscreen/DevSvr. Because
the user data (including logs and policies) can grow to be quite
large, it is sometimes desirable to place this data in another
partition.
Please enter an alternative location for this data if
so desired, or press ENTER for the location specified in the
brackets.
Enter data directory location [/var/netscreen/DevSvr]>
Enter the ID assigned by the GUI to this Device Server (1-65535) []> 1
Enter the one-time password for this Device Server
Enter password (password will not display as you type)>
Please enter again for verification
Enter password (password will not display as you type)>
To enable the Device Server to communicate with the GUI Server, you must
provide the IP address of the running GUI Server
Enter the IP address of the running GUI Server []> 10.157.48.108
########## HIGH AVAILABILITY (HA) SETUP DETAILS ##########
Will server processes need to be restarted automatically in case of a failure?
(y/n) [y]>
########## BACKUP SETUP DETAILS ##########
Will this machine require local database backups? (y/n) [y]>
Enter hour of day to start the database backup (00 = midnight, 02 = 2am, 14 = 2pm
...)[02]>
Will daily backups need to be sent to a remote machine? (y/n) [n]>
Enter number of database backups to keep [7]>
Enter the rsync backup timeout [3600]>
Enter database backup directory [/var/netscreen/dbbackup]>
########## DEVSVR DB SETUP DETAILS ##########
Enter Postgres DevSvr Db port [5432]>
Enter Postgres DevSvr Db super user [nsm]>
Enter Postgres DevSvr Db password for user 'nsm'
Enter password (password will not display as you type)>
Please enter again for verification
Enter password (password will not display as you type)>
########## POST-INSTALLATION OPTIONS ##########
NOTE: Do not start up the Device Server unless you have already added it to
the system from the UI.
67 Copyright © 2010, Juniper Networks, Inc.
Chapter 4: Installing NSM in a Distributed Configuration