Juniper NETWORK AND SECURITY MANAGER 2010.4 - REV1, Installation Manual

Page: 34 / 244

•
“Installing NSM in a Standalone Configuration” on page 21 — Includes specific
information describing how to install and run the management system on the same
server.
•
“Installing NSM in a Distributed Configuration” on page 49 — Includes specific information
describing how to install and run the GUI Server and Device Server on separate servers.
This configuration option enables you to extend performance and scalability for large
enterprises.
•
“Installing NSM with High Availability” on page 71 — Includes specific information
describing how to install and run the GUI Server and Device Server on the same server
with HA (simple high availability configuration) or separate servers with HA (extended
high availability configuration). This configuration option enables you to configure a
primary and secondary management system that is highly available.
•
“Upgrading to NSM 2010.4 from an Earlier Version” on page 131 — Includes specific
information describing how to upgrade previous installations of NSM to this version.
• “Maintaining NSM” on page 171 — Includes specific information describing how to
maintain, control, backup/restore, and uninstall the management system and User
Interface.
For installation instructions for the NSM appliances, see the NSMXpress and NSM3000
User Guide .
Copyright © 2010, Juniper Networks, Inc. 12
Network and Security Manager Installation Guide