Juniper NETWORK AND SECURITY MANAGER 2010.4 - REV1, Installation Manual

Page: 127 / 244

Enter number of database backups to keep [7]>
Enter the rsync backup timeout [3600]>
########## DEVSVR DB SETUP DETAILS ##########
Enter Postgres DevSvr Db port [5432]>
Enter Postgres DevSvr Db super user [nsm]>
Enter Postgres DevSvr Db password for user 'nsm'
Enter password (password will not display as you type)>
Please enter again for verification
Enter password (password will not display as you type)>
########## POST-INSTALLATION OPTIONS ##########
Start High Availability daemon processes when finished? (y/n) []> n
########## CONFIRMATION ##########
About to proceed with the following actions:
- Install Device Server
- Install GUI Server
- Install High Availability Server
- Store base directory for management servers as /usr/netscreen
- This machine will have base license with maximum 25 devices
- This machine participates in an HA cluster
- This server is the primary: No
- Store Device Server data in /var/netscreen/DevSvr
- Store GUI Server data in /var/netscreen/GuiSvr
- Store GUI Server database log in /var/netscreen/GuiSvr/xdb/log
- Use IP address 10.150.41.10 for management
- Use port 8443 for NBI Service
- Connect to GUI Server at 10.150.41.10:7801
- Set password for 'super' user
- CFM user: cfmuser
- CFM Password set for 'cfmuser'
- IP address for the primary HA Server: 10.150.41.9
- IP address for the secondary HA Server: 10.150.41.10
- Set shared password for heartbeat
- Number of Heartbeat links: 1
- IP address for this machine's primary heartbeat link: 10.150.42.10
- IP address for the peer's primary heartbeat link: 10.150.42.9
- IP address for remote HA replications: 10.150.41.9
- Port for HA heartbeat communication: 7802
- Seconds between heartbeat messages: 15
- Missing heartbeat messages: 4
- Outside pingable IP address: 10.150.47.254
- Become primary in the event of a tie: n
- HA rsync command replication timeout: 3600
- Create database backup in /var/netscreen/dbbackup
- Use rsync program at /usr/bin/rsync
- Path for the ssh command: /usr/bin/ssh
- Local database backups are enabled
- Start backups at 02
- Daily backups will not be sent to a remote machine
- Number of database backups to keep: 7
- HA rsync command backup timeout: 3600
- Postgres DevSvr Db Server port: 5432
- Postgres DevSvr Db super user: nsm
105 Copyright © 2010, Juniper Networks, Inc.
Chapter 5: Installing NSM with High Availability