Juniper NETWORK AND SECURITY MANAGER 2010.4 - REV1, Installation Manual, Page: 105 / 244

Table 13: Simple HA Configuration—System Parameters (continued)
Your Value Description Parameter
Parameters required for the Postgres Database used
for the Device Server. You must specify a port number,
superuser name and password. By default, the Postgres
Database uses port 5432; the superuser is “nsm” . Device Server
Database Parameters
Extended HA Configuration Parameters
Table 14 on page 83 describes additional system parameters that you need to identify
to install HA with the Device Server and GUI Server on separate server machines:
Table 14: Extended HA Configuration—System Parameters
Your Value Description Parameter
Unique ID assigned when you add the Device Server. Device Server ID
Password assigned to the Device Server enabling it to
authenticate with the GUI Server when attempting to
connect. Password for GUI
Server Connection
Shared Disk Parameters
If you are using a shared disk partition, the installer prompts you to configure additional
information. Table 15 on page 83 identifies the additional system parameters that you
need to identify to install HA with access to a shared disk.
Table 15: Shared Disk System Parameters
Your Value Description Parameter
The command to mount the shared data partition.
The default command is:
/bin/mount /var/netscreen/DevSvr
Command to mount
the shared disk
partition
The command to unmount the shared data partition.
Before configuring this command, you must first verify
that you have defined your mounts properly.
The default command is:
/bin/umount /var/netscreen/DevSvr
Command to unmount
the shared disk
partition
The command to check the integrity on the shared data
partition.
The default command is:
/sbin/fsck
Command to check the
integrity of the shared
data partition
Directory path of the shared disk mount point. Directory path for the
shared disk
83 Copyright © 2010, Juniper Networks, Inc.
Chapter 5: Installing NSM with High Availability