9.
Use the UI to test connectivity between secondary Device Server and the primary GUI
Server.
It is vital that the secondary Device Server remains the standby until after the first
remote replication occurs. Failure to achieve this will result in the secondary Device
Server using its own PKI information rather than that supplied by the primary Device
Server. If this occurs, it will not have the correct private key to enable the SSP
connection.
10.
Install the secondary GUI Server.
11.
Test that a successful remote replication occurs. You can do this by checking that
files are located in the secondary server's
/var/netscreen/dbbackup
directory. Again,
it is important not to failover before a remote replication has successfully finished.
12.
Allow the primary GUI Server to failover.
13.
Reboot the UI and verify the connection between the GUI Server and Device Server.
14.
Allow the primary Device Server to failover to test that it can connect to the secondary
GUI Server.
15.
Add your managed devices in the UI. Check the device connection to both Device
Servers.
NOTE:
When configuring an extended HA installation, the GUI Servers are
not replicated without a Device Server. Unless you add the Device Server
before the secondary GUI Server, the shadow_server entry is not created for
the secondary GUI Server.
Defining System Parameters
During the installation process, you are required to configure common system parameters
such as the location of the directories where you want to store data for the GUI Server
and Device Server. We recommend that you define these system parameters before
performing the management system installation.
Simple HA Configuration Parameters
Table 13 on page 80 describes the system parameters that you need to identify to install
HA with the Device Server and GUI Server on the same server machine.
79
Copyright © 2010, Juniper Networks, Inc.
Chapter 5: Installing NSM with High Availability
Summary of Contents for NETWORK AND SECURITY MANAGER 2010.4 - REV1
