•
General Electrical Safety Warnings for M Series, MX Series, and T Series Routers on
page 144
•
DC Power Electrical Safety Warnings for M Series, MX Series, and T Series Routers on
page 150
Safety Guidelines and Warnings for the M7i Router
•
General Safety Guidelines for M Series, MX Series, and T Series Routers on page 125
•
General Safety Warnings for M Series, MX Series, and T Series Routers on page 126
•
Preventing Electrostatic Discharge Damage to an M7i Router on page 128
•
Fire Safety Requirements for M Series, MX Series, and T Series Routers on page 129
•
M7i Router Installation Safety Guidelines and Warnings on page 130
•
Laser and LED Safety Guidelines and Warnings for the M7i Router on page 136
•
Maintenance and Operational Safety Warnings for M Series, MX Series, and T Series
Routers on page 139
•
Electrical Safety Guidelines and Warnings for the M7i Router on page 144
General Safety Guidelines for M Series, MX Series, and T Series Routers
The following guidelines help ensure your safety and protect the router from damage.
The list of guidelines might not address all potentially hazardous situations in your working
environment, so be alert and exercise good judgment at all times.
•
Perform only the procedures explicitly described in this documentation. Make sure that
only authorized service personnel perform other system services.
•
Keep the area around the chassis clear and free from dust before, during, and after
installation.
•
Keep tools away from areas where people could trip over them while walking.
•
Do not wear loose clothing or jewelry, such as rings, bracelets, or chains, which could
become caught in the chassis.
•
Wear safety glasses if you are working under any conditions that could be hazardous
to your eyes.
•
Do not perform any actions that create a potential hazard to people or make the
equipment unsafe.
•
Never attempt to lift an object that is too heavy for one person to handle.
•
Never install or manipulate wiring during electrical storms.
•
Never install electrical jacks in wet locations unless the jacks are specifically designed
for wet environments.
•
Operate the router only when it is properly grounded.
•
Do not open or remove chassis covers or sheet metal parts unless instructions are
provided in this documentation. Such an action could cause severe electrical shock.
125
Copyright © 2010, Juniper Networks, Inc.
Appendix A: Safety and Regulatory Compliance Information for the M7i Router
All manuals and user guides at all-guides.com
all-guides.com
