CHAPTER 11
Providing Power to the M7i Router
•
Connecting Power to an AC-Powered M7i Router on page 57
•
Connecting Power to a DC-Powered Router on page 57
•
Powering on the M7i Router on page 59
•
Powering Off the M7i Router on page 60
Connecting Power to an AC-Powered M7i Router
To connect power to an AC-powered router:
1.
Locate the power cords shipped with the router, which should have a plug appropriate
for your geographical location (see “M7i Router AC Power, Connection, and Power
Cord Specifications” on page 164).
2.
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
the strap to one of the ESD points on the chassis.
3.
Verify that the switch on each power supply faceplate is in the
OFF
(
O
) position.
4.
For each power supply, insert the appliance coupler end of a power cord into the
appliance inlet on a power supply faceplate and insert the plug into an AC power
source receptacle. Verify that the power cord does not block access to router
components or drape where people could trip on it.
Related
Documentation
Preventing Electrostatic Discharge Damage to an M7i Router on page 128
•
•
Removing an M7i AC Power Cord on page 110
•
M7i AC Power Electrical Safety Guidelines and Warnings on page 149
•
M7i AC Power Supply on page 22
•
M7i Router AC Power Supply Specifications on page 166
Connecting Power to a DC-Powered Router
Connect DC power to the router by inserting power cables into the field-wiring terminals
on the faceplate of each power supply. Power cables are not supplied with the router.
For information about the required cable type, see .
57
Copyright © 2010, Juniper Networks, Inc.
All manuals and user guides at all-guides.com
