4.
Arrange the cable to prevent it from dislodging or developing stress points. Secure
the cable so that it is not supporting its own weight as it hangs to the floor. Place
excess cable out of the way in a neatly coiled loop. Placing fasteners on the loop helps
to maintain its shape.
6.
Verify that the FIC or PIC is functioning correctly by noting whether the normal function
indicator LED is lit. The normal function indicator LED is usually green; for more
information, see the
M7i Multiservice Edge Router PIC Guide
.
You can also verify correct PIC functioning by issuing the
show chassis fpc pic-status
command, described in “Maintaining the M7i FIC and FIC Cables and PICs and PIC
Cables” on page 70.
Figure 36: Connecting Fiber-Optic Cable to a PIC
Related
Documentation
M7i Flexible PIC Concentrators (FPCs) Description on page 18
•
•
M7i PICs Description on page 16
•
Maintaining the M7i FIC and FIC Cables and PICs and PIC Cables on page 70
•
Troubleshooting the M7i FIC or PICs on page 80
Replacing an SFP on an M7i Router
Small form-factor pluggables (SFPs) are optical transceivers that can be removed from
a PIC (for more information, see “M7i PICs Description” on page 16).
SFPs are hot-insertable and hot-removable. Removing an SFP does not interrupt PIC
functioning, but the removed SFP no longer receives or transmits data. To replace an
SFP, perform the following procedures:
•
Removing an SFP from an M7i Router on page 95
•
Installing an SFP into an M7i Router on page 96
Copyright © 2010, Juniper Networks, Inc.
94
M7i Multiservice Edge Router Hardware Guide
All manuals and user guides at all-guides.com
