Juniper JUNOSE 11.2.X IP SERVICES, Configuration Manual

Page: 79 / 356

host1# show ip redistribute
To ospf, From static is enabled with route map 4
To ospf, From connected is enabled with route map 3
•
See show ip redistribute.
show ip route
•
Use to display the current state of the routing table, including routes that are not used
for forwarding.
•
You can display all routes, a specific route, all routes beginning with a specified address,
routes for a particular protocol (BGP, IS-IS, OSPF, or RIP), locally connected routes,
internal control routes, static routes, or summary counters for the routing table.
•
Field descriptions
•
Prefix—IP address prefix
•
Length—Prefix length
•
Type—Protocol type
•
Next Hop—IP address of the next hop
•
Dist—Distance metric for the route
•
Met—Number of hops
•
Intf—Interface type and interface specifier
•
Example 1
host1# show ip route
Protocol/Route type codes:
I1- ISIS level 1, I2- ISIS level2,
I- route type intra, IA- route type inter, E- route type external,
i- metric type internal, e- metric type external,
O- OSPF, E1- external type 1, E2- external type2,
N1- NSSA external type1, N2- NSSA external type2
Prefix/Length Type Next Hop Dist/Met Intf
------------- ---- -------- -------- ------
172.16.2.0/24 Bgp 192.168.1.102 20/1 fastEthernet0/0
10.10.0.112/32 Static 192.168.1.1 1/1 fastEthernet0/0
10.1.1.0/24 Connect 10.1.1.1 0/1 atm3/0.100
•
Example 2
host1# show ip route static
Protocol/Route type codes:
I1- ISIS level 1, I2- ISIS level2,
I- route type intra, IA- route type inter, E- route type external,
i- metric type internal, e- metric type external,
O- OSPF, E1- external type 1, E2- external type2,
N1- NSSA external type1, N2- NSSA external type2
Prefix/Length Type Next Hop Dist/Met Intf
------------- ---- -------- -------- ------
10.10.0.112/32 Static 192.168.1.1 1/1 fastEthernet0/0
53 Copyright © 2010, Juniper Networks, Inc.
Chapter 1: Configuring Routing Policy