Juniper JUNOSE 11.2.X IP SERVICES, Configuration Manual

Page: 113 / 356

Simple translation entries appear with inside/outside and local/global address
information. Extended entries appear with added protocol and port numbers (or query
IDs).
Using verbose mode additionally provides the time since creation and time since last use
for each translation entry.
show ip nat translations
•
Use to display current translations that reside in the NAT translation table.
•
Field descriptions
•
Prot—Protocol (TCP, UDP, ICMP, or GRE) for this translation entry; this field appears
only for extended table entries
•
Inside local—Inside local IP address for this translation entry; this field also provides
the port number, separated by a colon ( : ) for extended entries
•
Inside global—Inside global IP address for this translation entry; this field also provides
the port number, separated by a colon ( : ) for extended entries
•
Outside global—Outside global IP address for this translation entry; this field also
provides the port number, separated by a colon ( : ) for extended entries
•
Outside local—Outside local IP address for this translation entry; this field also
provides the port number, separated by a colon ( : ) for extended entries
•
Time since creation—Amount of time elapsed since the translation entry appeared
in the translation table
•
Time since last use—Amount of time elapsed since the translation entry was used
•
Example 1
host1# show ip nat translations
Prot Inside local Inside global Outside global Outside local
---- ------------- -------------- -------------- ---------------
GRE 13.1.2.1:* 20.0.0.1:* --- ---
ICMP 13.1.2.2:4 20.0.0.2:4 --- ---
TCP 13.1.2.3:20 20.0.0.3:50 --- ---
NOTE: Because they are not NAPT translations, port numbers for GRE translations
appear as asterisks (*).
•
Example 2
host1# show ip nat translations verbose
Time Time
Inside Inside Outside Outside since since
Prot local global global local creation last use
---- ----------- ---------- ----------- ----------- ---------- --------
20.0.0.3 30.0.0.3 --- --- 00:04:50 00:00:01
87 Copyright © 2010, Juniper Networks, Inc.
Chapter 2: Configuring NAT