Juniper JUNOSE 11.2.X IP SERVICES, Configuration Manual

Page: 38 / 356

•
Use to match any routes that are advertised from addresses contained in the specified
prefix list.
•
Example
host1(config-route-map)# match ipv6 route-source prefix-list source
•
Use the no version to delete all route-source match clauses from a route map unless
you specify a prefix list, in which case only that prefix list match is removed from the
route map.
•
See match ipv6 route-source.
match level
•
Use to match routes for the specified level.
•
Example
host1(config-route-map)# match level level-1
•
Use the no version to delete the match clause from a route map or a specified value
from the match clause.
•
See match level.
match metric
•
Use to match a route for the specified metric value.
•
Example
host1(config-route-map)# match metric 10
•
Use the no version to delete the match clause from a route map or a specified value
from the match clause.
•
See match metric.
match metric-type
•
Use to match a route for the specified metric type.
•
Example
host1(config-route-map)# match metric-type external
•
Use the no version to delete the match clause from a route map.
•
See match metric-type.
match policy-list
•
Use to reference a policy list that has the specified name.
•
Example
host1(config-route-map)# match policy-list list1
•
Use the no version to remove the match clause from a route map.
•
See match policy-list.
Copyright © 2010, Juniper Networks, Inc. 12
JunosE 11.2.x IP Services Configuration Guide