Juniper JUNOSE 11.2.X IP SERVICES, Configuration Manual

Page: 37 / 356

•
Use to match any route that has a destination network number that is permitted by
an access list, a prefix list, or a prefix tree, or that performs policy routing on packets.
•
Example
host1(config-route-map)# match ip address prefix-tree boston
•
Use the no version to delete the match clause from a route map or a specified value
from the match clause.
•
See match ip address.
match ip next-hop
•
Use to match any routes that have a next-hop router address passed by the specified
access list, prefix list, or prefix tree.
•
Example
host1(config-route-map)# match ip next-hop 5 acl_192_54_24_1
•
Use the no version to delete the match clause from a route map or a specified value
from the match clause.
•
See match ip next-hop.
match ipv6 address
•
Use to match any routes that have a destination network number address that is
permitted by the specified prefix list.
•
Example
host1(config-route-map)# match ipv6 address prefix-list boston
•
Use the no version to delete all address match clauses from a route map unless you
specify a prefix list, in which case only that prefix list match is removed from the route
map.
•
See match ipv6 address.
match ipv6 next-hop
•
Use to match any routes that have a next-hop router address passed by the specified
prefix list.
•
Example
host1(config-route-map)# match ipv6 next-hop prefix-list next1
•
Use the no version to delete all next-hop match clauses from a route map unless you
specify a prefix list, in which case only that prefix list match is removed from the route
map.
•
See match ipv6 next-hop.
match ipv6 route-source
11 Copyright © 2010, Juniper Networks, Inc.
Chapter 1: Configuring Routing Policy