Juniper JUNOSE 11.2.X IP SERVICES, Configuration Manual

Page: 81 / 356

•
Interface—Interface type and specifier associated with the IP address; displays “
Local Interface” if a special interface index is present in the routing table for special
IP addresses, such as broadcast addresses
•
Next Hop—Next hop to reach the IP address; displays “ ---” if no next hop is associated
with the IP address
•
Example 1
host1# show ip route slot 6 10.10.0.231
IP address Interface Next Hop
------------ ---------------- ------------
10.10.0.231 fastEthernet 6/0 10.10.0.231
•
Example 2
host1# show ip route slot 9 90.248.1.2
IP address Interface Next Hop
------------ ---------------- ------------
90.248.1.2 serial9/23:2 ---
•
Example 3
host1# show ip route slot 9 90.249.255.255
IP address Interface Next Hop
------------ ---------------- ------------
90.249.255.255 Local Interface ---
•
See show ip route slot.
show ip static
•
Use to display the status of static routes in the routing table.
•
You can specify an optional IP mask that filters specific routes.
•
Field descriptions
•
Prefix—IP address prefix
•
Length—Prefix length
•
Next Hop—IP address of the next hop
•
Met—Number of hops
•
Dist—Administrative distance or weight assigned to the route
•
Tag—Tag value assigned to the route
•
Intf—Interface type and interface specifier
•
Example
host1# show ip static
Prefix/Length Next Hop: Met: Dist: Tag: Intf:
10.2.0.0/24 192.168.1.1 1 1 0 ethernet6/0
55 Copyright © 2010, Juniper Networks, Inc.
Chapter 1: Configuring Routing Policy