Juniper JUNOSE 11.2.X IP SERVICES, Configuration Manual

Page: 36 / 356

•
Example
host1(config-route-map)# match as-path pathlist5
•
Use the no version to delete the match clause from a route map or a specified value
from the match clause.
•
See match as-path.
match community
•
Use to match a community list.
•
This command supports inbound and outbound route maps.
•
Example
host1(config-route-map)# match community comm5
•
Use the no version to delete the match clause from a route map or a specified value
from the match clause.
•
See match community.
match distance
•
Use to match any routes being redistributed out of the routing table that have the
specified administrative distance.
•
Distance is used to determine the relative preference between routes to the same
prefix in order to pick the best route to that prefix in the routing table. Distance has no
meaning in any other circumstance, and any attempt to match distance fails.
•
Example
host1(config-route-map)# match distance 25
•
Use the no version to delete the match clause from a route map or a specified value
from the match clause.
•
See match distance.
match extcommunity
•
Use to match an extended community list in a route map.
•
You can specify one or more extended community list names in a match clause. If you
specify more than one extended community list, the lists are logically ORed.
•
Example
host1(config-route-map)# match extcommunity topeka10
•
Use the no version to remove the match clause from a route map or a specified value
from the match clause.
•
See match extcommunity.
match ip address
Copyright © 2010, Juniper Networks, Inc. 10
JunosE 11.2.x IP Services Configuration Guide