manualshive.com logo in svg

Juniper JUNOSE 11.2.X IP SERVICES, Configuration Manual

Juniper JUNOSE 11.2.X IP SERVICES Configuration Manual is a comprehensive guide for setting up and managing your Juniper network devices. This manual covers all the necessary steps to configure your IP services effectively. Download this manual for free from our website and optimize your network performance.

Share
Download
background image

Prefix Trees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Using a Prefix Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Community Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Extended Community Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Using Regular Expressions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

AS-path Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Community Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Community Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Metacharacters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Using Metacharacters as Literal Tokens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Regular Expression Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Managing the Routing Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Troubleshooting Routing Policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Monitoring Routing Policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Chapter 2

Configuring NAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Platform Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Module Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
NAT Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Traditional NAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Basic NAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
NAPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Bidirectional NAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Twice NAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Network and Address Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Inside Local Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Inside Global Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Outside Local Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Outside Global Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Understanding Address Translation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Inside Source Translation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Outside Source Translation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Address Assignment Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Static Translations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Dynamic Translations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Order of Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Inside-to-Outside Translation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Outside-to-Inside Translation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

PPTP and GRE Tunneling Through NAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Packet Discard Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Configuring a NAT License . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Limiting Translation Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Specifying Inside and Outside Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Defining Static Address Translations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Creating Static Inside Source Translations . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Creating Static Outside Source Translations . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Copyright © 2010, Juniper Networks, Inc.

x

JunosE 11.2.x IP Services Configuration Guide

Summary of Contents for JUNOSE 11.2.X IP SERVICES





































































































































































































































































































































































Reviews:

No comments

Related manuals for JUNOSE 11.2.X IP SERVICES

F-SECURE PSB Getting Started Manual preview
PSB
Brand: F-SECURE Pages: 18
Panasonic PT-D10000 Series Setup And Operation Manual preview
PT-D10000 Series
Brand: Panasonic Pages: 37
Generic Media gMovie v1.4 Operating Instructions Manual preview
gMovie v1.4
Brand: Generic Media Pages: 17
altiris eXpress Altris eXpress Helpdesk Solution 5.6 SP1 User Manual preview
eXpress Altris eXpress Helpdesk Solution 5.6 SP1
Brand: altiris Pages: 143
SanDisk musicmatch User Manual preview
musicmatch
Brand: SanDisk Pages: 11
AMX I!-TIMEMANAGER Instruction Manual preview
I!-TIMEMANAGER
Brand: AMX Pages: 16
Spectra Logic Spectra nTier500 User Manual preview
Spectra nTier500
Brand: Spectra Logic Pages: 112
Avermedia A16AR User Manual preview
A16AR
Brand: Avermedia Pages: 97
FieldServer FS-8700-47 Driver Manual preview
FS-8700-47
Brand: FieldServer Pages: 51
Darim VideoSpider User Manual preview
VideoSpider
Brand: Darim Pages: 8
Sybase ADAPTIVE SERVER IQ 12.4.0 Release Manual preview
ADAPTIVE SERVER IQ 12.4.0
Brand: Sybase Pages: 52
MACROMEDIA STUDIO 8-EXPLORING STUDIO 8 Manual preview
STUDIO 8-EXPLORING STUDIO 8
Brand: MACROMEDIA Pages: 350
Rane SIXTY-EIGHT Quick Start Manual preview
SIXTY-EIGHT
Brand: Rane Pages: 8
TC Electronic PowerCore Master X3 Product Manual preview
PowerCore Master X3
Brand: TC Electronic Pages: 11
Barco Projector Toolset Reference Manual preview
Projector Toolset
Brand: Barco Pages: 245
Lenovo THINKPAD X40 (Korean) Troubleshooting Manual preview
THINKPAD X40
Brand: Lenovo Pages: 134
Lenovo THINKPAD X30 (Korean) Service And Troubleshooting Manual preview
THINKPAD X30
Brand: Lenovo Pages: 136
Lenovo ThinkPad Z61E Hardware Maintenance Manual preview
ThinkPad Z61E
Brand: Lenovo Pages: 178

Brands by name

Popular brands

Load more brands