manualshive.com logo in svg

Juniper JUNOSE 11.2.X IP SERVICES, Configuration Manual

Juniper JUNOSE 11.2.X IP SERVICES Configuration Manual is a comprehensive guide for setting up and managing your Juniper network devices. This manual covers all the necessary steps to configure your IP services effectively. Download this manual for free from our website and optimize your network performance.

Share
Download
background image

File Extensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
Certificate Chains . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211

IKE Authentication Using Public Keys Without Digital Certificates . . . . . . . . . . . . 212

Configuration Tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212
Public Key Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212

Configuring Digital Certificates Using the Offline Method . . . . . . . . . . . . . . . . . . . 213
Configuring Digital Certificates Using the Online Method . . . . . . . . . . . . . . . . . . . 219
Configuring Peer Public Keys Without Digital Certificates . . . . . . . . . . . . . . . . . . 224
Monitoring Digital Certificates and Public Keys . . . . . . . . . . . . . . . . . . . . . . . . . . 228

Chapter 9

Configuring IP Tunnels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237

GRE Tunnels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237
DVMRP Tunnels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 238

Platform Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 238

Module Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 238

ERX7xx Models, ERX14xx Models, and the ERX310 Router . . . . . . . . . . 238
E120 Router and E320 Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239

Redundancy and Tunnel Distribution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239

References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239
Configuration Tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240

Configuration Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242
Configuring IP Tunnels to Forward IP Frames . . . . . . . . . . . . . . . . . . . . . . . . 243
Preventing Recursive Tunnels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 243
Creating Multicast VPNs Using GRE Tunnels . . . . . . . . . . . . . . . . . . . . . . . . . 244

Monitoring IP Tunnels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244

Chapter 10

Configuring Dynamic IP Tunnels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 251

Dynamic IP Tunnel Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 251

Data MDT for Multicast VPNs and Dynamic IP Tunnels . . . . . . . . . . . . . . . . 252
Mobile IP and Dynamic IP Tunnels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252
Combining Dynamic and Static IP Tunnels in the Same Chassis . . . . . . . . . 253
Changing and Removing Existing Dynamic IP Tunnels . . . . . . . . . . . . . . . . . 253

Platform Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 253

Module Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 254

ERX7xx Models, ERX14xx Models, and the ERX310 Router . . . . . . . . . . 254
E120 Router and E320 Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 254

Redundancy and Tunnel Distribution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 255

References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 255
Configuring a Destination Profile for Dynamic IP Tunnels . . . . . . . . . . . . . . . . . . 255

Modifying the Default Destination Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . 255

Modifying the Configuration of the Default Destination Profile . . . . . . . 256

Configuring a Destination Profile for GRE Tunnels . . . . . . . . . . . . . . . . . . . . 256
Creating a Destination Profile for DVMRP Tunnels . . . . . . . . . . . . . . . . . . . . 256

Monitoring Dynamic IP Tunnels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 259

xv

Copyright © 2010, Juniper Networks, Inc.

Table of Contents

Summary of Contents for JUNOSE 11.2.X IP SERVICES





































































































































































































































































































































































Reviews:

No comments

Related manuals for JUNOSE 11.2.X IP SERVICES

Acer AO533 Driver Installation preview
AO533
Brand: Acer Pages: 4
MACROMEDIA FIREWORKS 2 Use Manual preview
FIREWORKS 2
Brand: MACROMEDIA Pages: 156
Adobe 23101764 - Photoshop CS - PC Manual preview
23101764 - Photoshop CS - PC
Brand: Adobe Pages: 105
TC Electronic RESTORATION SUITE User Manual preview
RESTORATION SUITE
Brand: TC Electronic Pages: 31
RTS RTS ISDN 2002 Operator'S Manual preview
RTS ISDN 2002
Brand: RTS Pages: 51
Intergraph InterSite Quick Start Manual preview
InterSite
Brand: Intergraph Pages: 46
F-SECURE POLICY MANAGER 7.0 - Administrator'S Manual preview
POLICY MANAGER 7.0 -
Brand: F-SECURE Pages: 241
FieldServer FS-8700-101 Driver Manual preview
FS-8700-101
Brand: FieldServer Pages: 23
Macgo Mac Blu-ray Player User Manual preview
Mac Blu-ray Player
Brand: Macgo Pages: 26
MACROMEDIA DIRECTOR MX 2004-DIRECTOR SCRIPTING Reference preview
DIRECTOR MX 2004-DIRECTOR SCRIPTING
Brand: MACROMEDIA Pages: 1130
ZENEC Z-EMAP50 User Manual preview
Z-EMAP50
Brand: ZENEC Pages: 80
Xilinx LogiCORE IP CAN 3.2 Getting Started Manual preview
LogiCORE IP CAN 3.2
Brand: Xilinx Pages: 28
MACROMEDIA 38000382 - Macromedia JRun - Mac Getting Started Manual preview
38000382 - Macromedia JRun - Mac
Brand: MACROMEDIA Pages: 132
Novell IDENTITY MANAGER 3.6.1 - STAGING BEST PRACTICES GUIDE 2010 Implementation Manual preview
IDENTITY MANAGER 3.6.1 - STAGING BEST PRACTICES GUIDE 2010
Brand: Novell Pages: 54
KAPERSKY ANTI-VIRUS 7.0 User Manual preview
ANTI-VIRUS 7.0
Brand: KAPERSKY Pages: 235
Paradyne OpenLane SLM 5.5 Administrator'S Manual preview
OpenLane SLM 5.5
Brand: Paradyne Pages: 112
Xerox DocuShare 6.0 User Manual preview
DocuShare 6.0
Brand: Xerox Pages: 20
TC Electronic Tap Factory Multi-Tap Delay Product Manual preview
Tap Factory Multi-Tap Delay
Brand: TC Electronic Pages: 12

Brands by name

Popular brands

Load more brands