Juniper JUNOSE 11.2.X IP SERVICES, Configuration Manual

Page: 226 / 356

•
Example 3—Topology discovery table for a particular neighbor
host1# show l2c discovery-table neighbor "Accessnode_10"
Access-Loop-Id: Dslam_10 atm 10/5:0.0 DOWN
Neighbor: DSLAM_10
Line-State: 2(IDLE)
Dsl-Type: 0(Invalid transmission type)
Total Line Attributes: 2
Access-Loop-Id: Dslam_10 atm 10/6:0.0 DOWN
Neighbor: DSLAM_10
Line-State: 2(IDLE)
Dsl-Type: 0(Invalid transmission type)
Total Line Attributes: 2
Access-Loop-Id: Dslam_10 atm 10/7:0.0 DOWN
Neighbor: DSLAM_10
Line-State: 2(IDLE)
Dsl-Type: 0(Invalid transmission type)
Total Line Attributes: 2
Access-Loop-Id: Dslam_10 atm 2/0:0.0 UP
Neighbor: DSLAM_10
Actual-Data-Rate-Upstream: 1184(kbps)
Actual-Data-Rate-Downstream: 8064(kbps)
Attainable-Data-Rate-Upstream: 1184(kbps)
Attainable-Data-Rate-Downstream: 9408(kbps)
Line-State: 1(SHOWTIME)
Dsl-Type: 0(Invalid transmission type)
Total Line Attributes: 6
•
See show l2c discovery-table.
show l2c label
•
Use to display information about known ANCP labels on the router.
•
Use the neighbor-input keyword to display labels for input ports.
•
Use the neighbor-output keyword to display labels for output ports.
•
Use the brief keyword to show limited information.
•
Field descriptions
•
Interface—Interface on which ANCP is configured
•
End-User-Id—Output label associated with the interface
•
Neighbor—Neighbor associated with the interface
•
Max-Branches—Maximum number of branches to which the ANCP interface can
subscribe
•
Peer-Attach-Id—Input label associated with the interface
•
Example 1
host1# show l2c label
Interface: ATM2/0.300
End-User-Id: Accessnode_10 atm2/2:0.0
Neighbor: accessnode _1002
Max-Branches: 5
Interface: ATM2/0.301
Copyright © 2010, Juniper Networks, Inc. 200
JunosE 11.2.x IP Services Configuration Guide