Juniper JUNOSE 11.2.X IP SERVICES, Configuration Manual

Page: 209 / 356

outboundUserOctetsReceived = 74544
outboundAccPacketsReceived = 88
outboundAccOctetsReceived = 79168
outboundOtherTxErrors = 0
outboundPolicyErrors = 0
inbound:
inboundUserPacketsReceived = 88
inboundUserOctetsReceived = 74880
inboundAccPacketsReceived = 88
inboundAccOctetsReceived = 79488
inboundAuthenticationErrors= 0
inboundReplayErrors = 0
inboundPolicyErrors = 0
inboundOtherRxErrors = 0
inboundDecryptErrors = 0
inboundPadErrors = 0
•
See show ipsec tunnel profile.
show subscribers
•
Use to display the active subscribers on the router.
•
Field descriptions
•
User Name—Name of the subscriber
•
Type—Type of subscriber: atm, ip, ipsec, ppp, tnl (tunnel), tst (test)
•
Addr | Endpt—IP or IPv6 address and source of the address: l2tp, local, dhcp, radius,
user. For local, dhcp, radius, and user endpoints, the address is that of the user. When
the endpoint is l2tp, the address is that of the LNS.
•
Virtual Router—Name of the virtual router context
•
Interface—Interface specifier over which the subscriber is connected
•
Login Time—Date, in YY/MM/DD format, and time the subscriber logged in
•
Circuit Id—User's circuit ID value specified by PPPoE
•
Remote Id—User's remote ID value specified by PPPoE
•
Example
host1# show subscribers
Subscriber List
----------------
Virtual
User Name Type Addr|Endpt Router
----------------------- ----- -------------------- ------------
xcfgUser1@vpn1 ipsec 10.227.5.106/local vpn1
User Name Interface
----------------------- --------------------------------
xcfgUser1@vpn1 FastEthernet 5/2.4
User Name Login Time Circuit Id
----------------------- ------------------- -------------------
xcfgUser1@vpn1 06/05/12 10:58:42 0.4.1.10.fe.25.3b.0
User Name Remote Id
183 Copyright © 2010, Juniper Networks, Inc.
Chapter 6: Configuring Dynamic IPSec Subscribers