JUMO AQUIS touch S, Assembly Instructions Manual

Page: 12 / 150

10 Configuration
12
10.4.2 Screen
Open: Device Menu > Configuration > Display > Screen
10.4.3 Colors
Open: Device Menu > Configuration > Display > Colors
Configuration item Selection/
setting option Explanation
Activation of screen-
saver inactive
time to switch off
control signal Type of screensaver activation
Wait time for screen-
saver 10 to 32767 s only with activation of the screensaver after
wait time:
Time to wait before displaying the screensaver
when there is no activity on the device
Signal screensaver Selection from
binary selector only with control signal screensaver activa-
tion:
Signal for activating the screensaver
Brightness 1 to 10 Display brightness (10 levels)
Configuration point Selection/
setting option
Explanation
Alarm 1 to 2 Selection from
color palette Color setting for signaling alarms 1 to 2 of the
measuring inputs
Upon reaching the set alarm values, the mea-
sured value displays and bar graphs appear in
the set colors.
Recording:
Analog channel
1 to 4
Binary channel
1 to 3
Background, ana-
logue
Background, binary
Color t-stamp diagr
Color diag. traces
Selection from
color palette Color setting for the visualization elements of the
individual recorder screens
Controller
Background
Setpoint value
Actual value
Output level
Heating contact
Cooling contact
Selection from
color palette Color setting for the visualization elements of the
individual controller screens