JUMO AQUIS touch S, Assembly Instructions Manual

Page: 10 / 150

10 Configuration
10
10.3 Basic settings
Open: Device Menu > Configuration > Basic Settings
Configuration point Selection/
setting option
Explanation
Device name up to 20 text characters Device ID, e.g. for identification of exported mea-
surement data in the JUMO PCA 3000 evalua-
tion software
National language German
English Setting the operating language
Additional languages can be installed on the de-
vice using the setup program.
⇨
Operating manual B 202581.0
Language select after
power on Yes
No Specifies whether a prompt for selecting the op-
erating language should appear when the device
is switched on
Mains frequency 50 Hz
60 Hz Supply frequency of the electric power grid serv-
ing the mounting site
The supply frequency must be specified to sup-
press EMC interference caused by the mains
voltage. Setting the correct supply frequency is
thus also necessary when supplying the device
with direct voltage.
Device temp. Degrees Celsius
Degrees Fahrenheit Setting the default on the temperature unit for all
temperature values in the device
Interface temperature Degrees Celsius
Degrees Fahrenheit
Setting the default on the temperature unit for all
temperature values communicated via interfaces
Memory alarm limit 0 to 100 % If the available memory display reaches this val-
ue, the memory alarm is triggered.