10
2-1
UPPER MAIN FRAME SECTION ASSEMBLY
Frame Supporter
3 x 8 mm
Socket Head
Bolt
Slot denotes left frame side
3 x 8 mm Socket Head Bolt
Bearing side must face
downward
3 X 8 mm Socket Head Bolt
Use Threadlock
Use Threadlock
Use Threadlock
Upper Main Frame, Left
Upper Main Frame, Right
Main Frame Standoff,
32 mm (3)
*
Elevator Arm from Step 1-3
Elevator Arm
Bushing, 32 mm 5 mm Nylon
Washer (2)
Use blue Threadlock on all screws
UP
UP
Bearing Flush
with Flange
Bearing
Bearing
Bearing side must
face upward
*Note: Install elevator arm
assembly first!
Note: Be sure to note the left
and right upper main
frame positions.
Bearing Flush
with Flange
5 mm nylon washer
Main frame standoff, 32 mm
.................................. 16 pcs
.................................................... 2 pcs
...... 3 pcs
........ 1 pc
3 x 8 mm Socket Head Bolt
Elevator Arm Bushing, 32 mm
Use
Threadlock
3 x 8 mm Socket Head Bolt
Position so side of the
bearing block that has
the bearing flush with
the flange is upward.
Lower Main Shaft-Bearing Block
Position so side of
the bearing block
that has the bearing
flush with the flange
is downward.
Upper Main Shaft-Bearing Block
.............. 2 pcs
Body Mounting Standoff, 37 mm
Body Mounting Standoff, 37 mm (2)
3 x 8 mm
Socket Head Bolt
JRP9012.46 Robinson R22 Manual 10/6/00 5:05 PM Page 10