24
5-1
TAIL OUTPUT SHAFT/PULLEY ASSEMBLY
5-2
TAIL GEAR CASE ASSEMBLY
Spring Pin
.......... 1 pc
Tail Output Shaft
Short Distance
Tail Case Pulley
Edge of Work Bench
Complete Assembly
Spring Pin
Hammer
Long Distance
Note correct direction of tail
output shaft during assembly.
Preassembled in kit
Use blue Threadlock
2.6 x 10 mm Socket Head Bolt
........ 3 pcs
Tail Output Shaft Bearing
.......... 2 pcs
3 x 12 mm Socket Head Bolt
........ 4 pcs
2.6 mm Hex Nut
..................... 4 pcs
Note: Be sure to position the tail gear case onto
the shorter slotted side of the tail boom.
Longer (Helicopter)
Shorter (Tail Gear Case)
2.6 mm Hex Nut (4)
Tail Boom
Tail Drive Belt
Tail output
shaft assembly
3 x 12 mm Socket
Head Bolt (4)
Tail Output
Shaft Bearing
Tail Gear Case (L/R)
Tail Output
Shaft Bearing
3 x 12 mm Self
Tapping Screw
2.6 x 10 mm
Socket Head Bolt
Tail Boom
Use Threadlock
Use Threadlock
3 x 12 mm Self Tapping Screw
.... 2 pcs
Tail Output
Shaft Bearing
60 mm
JRP9012.46 Robinson R22 Manual 10/6/00 5:05 PM Page 24
