18
3-7
ENGINE INSTALLATION (ALL)
3-8
INSTALLATION OF THE MUFFLER
Pressure Tap
................... 1 pc
3 x 30 mm Socket Head Bolt ..... 2 pcs
Adjust the height and position of the engine as shown so the bottom
of the clutch assembly is flush with the bottom of the clutch bell.
Check that the engine and clutch bell are parallel.
*It is highly recommended
that you insert the muffler
bolts into the engine case
prior to installing the
engine in the frame.
3 mm Flat Washer
........................ 4 pcs
3 mm Flat Washer (4)
3 x 8 mm Socket Head Bolt
Pressure Fuel Line Attachment
JR .46 Muffler Shown
(purchased separately, JRP960079)
Pressure Tap
Correct
Incorrect
See note in Step 3-5
Note: The installation shown is for a .46–.50 size engine with a JR Muffler (JRP960079).
Installation of other engine/muffler combinations may vary. Please refer to your
engine/muffler instructions for proper installation.
Use blue Threadlock
on all screws
Use
Threadlock
...... 4 pcs
3 x 8 mm Socket Head Bolt
Use Threadlock
Use blue Threadlock
JRP9012.46 Robinson R22 Manual 10/6/00 5:05 PM Page 18
