11
2-2
UPPER MAIN FRAME CLUTCH/TAIL PINION INSTALLATION
3 x 8 mm Socket Head Bolt
Clutch Bell/Start Shaft Assembly
Tail Drive Pinion/Bearing Block Assembly
3 x 8 mm Flat Washer
Note: Both the clutch bell/start shaft
assembly (Step 1-1) and the tail
drive pinion/bearing block
assembly (Step 1-2) are
temporarily installed at this time.
These assemblies will be adjusted
and secured in Step 3-2.
3 x 8 mm Socket Head Bolt
3 mm Flat Washer
........................................... 10 pcs
............................................................. 10 pcs
3 x 8 mm Socket Head Bolt
3 x 8 mm Flat Washer
JRP9012.46 Robinson R22 Manual 10/6/00 5:05 PM Page 11