28
5-9
TAIL BOOM BRACE ASSEMBLY
5-10
TAIL BRACE/BODY MOUNT ATTACHMENT
2.6 x 12 mm Socket Head Bolt
................ 4 pcs
2.6 x 12 mm Socket Head Bolt
2.6 x 12 mm Socket Head Bolt
Tail Brace Tube
Tail Brace Connector
Tail Brace Connector
* For added boom brace strength,
bond the tail brace ends to the
tube after assembly with thick
CA adhesive.
Two Assemblies Required
3 x 12 mm Socket Head Bolt
.............. 1 pc
3 x 15 mm Socket Head Bolt
......... 2 pcs
2.6 x 15 mm Socket Head Bolt
......... 1 pc
3 x 20 mm Set Screw
......... 1 pc
3 mm Lock Nut
.............................. 1 pc
2.6 mm Lock Nut
.............................. 2 pcs
3 mm Flat Washer
.............................. 2 pcs
3 mm Plastic Spacer
........................... 2 pcs
6 mm Aluminum Spacer
....................... 2 pcs
21 mm Main Frame Standoff
... 2 pcs
Note: Do not completly tighten bolts until the tail braces have been test fitted as shown.
Position the body mount attachment
to the distance shown.
Attach the 2 tail braces to finalize the body
mount position as shown. Remove the tail
braces after the position has been established.
110 mm
21 mm Main Frame Standoff (2)
3 mm Lock Nut (2)
2.6 mm Lock Nut (2)
Body Mount Attachment (L&R)
2.6 x 15 mm
Socket Head Bolt (2)
3 x 20 mm Set Screw (2)
21 mm Main Frame Standoff (2)
6 mm Aluminum Spacer (2)
3 mm Flat Washer
3 x 15 mm
Socket Head Bolt (2)
3 x 12 mm
Socket Head Bolt (2)
3 mm Plastic Spacer (2)
Use Threadlock
Use Threadlock
Use Threadlock
JRP9012.46 Robinson R22 Manual 10/6/00 5:05 PM Page 28
