3-5
ENGINE MOUNT ATTACHMENT
3-6
CLUTCH ASSEMBLY ATTACHMENT (ALL)
It is important to note the proper direction that the motor mount is
installed to achieve the correct alignment of the engine. The mount can
be rotated 180° to accomodate the different engines listed above.
3 mm Flat Washer
............................ 4 pcs
3 x 15 mm Socket Head Bolt
............. 4 pcs
............................ 4 pcs
2 x 8 mm Flat Head Screw
3 mm Flat Washer
Steel Joint Ball
3 x 5 mm Socket Head Bolt
2 mm Hex Nut
.46 Engine Mount
.46 Fan Assembly
3 mm Serrated
Washer (4)
3 x 15 mm Socket
Head Bolts (4)
Use Threadlock
Shorter Distance
Longer Distance
*See Note
Longer Distance
3 mm Flat
Washer (4)
2 mm Hex Nut
Clutch Assembly
3 mm Flat Washer (2)
3 x 5 mm Socket Head Bolt (2)
2 x 8 mm Flat
Head Screw
Steel Joint Ball
*See Note
Top
Bottom
Bottom
Motor Mount Direction:
Thunder Tiger
Motor Mount Direction:
O.S./MDS
Thunder Tiger
Pro .46
Top
O.S. .46 FS
MDS
Shorter Distance
Use Threadlock
Use Threadlock
Use blue Threadlock
Use blue Threadlock
3 mm Serrated Washer
Inside Holes
Outside Holes
*Note: When installing an O.S. brand engine, it may be
neccessary to add additional washers under the
bolt heads to allow proper clearance to the engine
mounting bolts.
............... 1 pc
.................... 2 pcs
....................... 1 pc
..................... 1 pc
......... 2 pcs
17
Joint Ball Spacer
2 mm Hex Nut
Steel Joint Ball
2 x 8 mm Flat
Head Screw
When you use OS46FX-H, attach the joint ball
to the carburetor using parts shown above.
Use Threadlock
*Note
Use Threadlock
Use Threadlock
JRP9012.46 Robinson R22 Manual 10/6/00 5:05 PM Page 17
