JR ProPo C.O.L.T., Operation Manual

Page: 32 / 82

31
ᴾ
▋ Swash Mixing【SWASH MIX】
▋ Function Explanation
This function sets the mixing relating to the swash plate and swash plate servos (1-3) to allow
coordinated control of the helicopter. The swash mixing is essential for helicopters that incorporate CCPM
systems. CCPM is a type of pitch mixing in which the servos are directly linked to the swash plate. In this
transmitter, 3 types of swash plate can be selected. An E-ring function is also incorporated that easily limits the
swash maximum angle.
▋ Setting Method
Set the “SWASH TYPE” according to the helicopter's swash plate configuration. The “SWASH TYPE” selection is in
the System List, and should be chosen before proceeding to set the swash mix. Note: Refer to Page 64 for detail.
The default settings for the Swash Mix are +60% on Aileron, Elevator and Pitch. If necessary, adjust the mixing
amount and direction according to the type of helicopter and servos used. Press the dial to display the setting
box, and then carry out numerical value adjustment.
Exponential Function (EXP)
By activating this function, the servo's non-linear output is modified to be more linear in motion.
E-Ring Function (E-RING)
By activating this function, the e-ring electronically corrects the swash to move in the same angle in all directions.
The operation of the stick and e-ring can be confirmed on the graph. The diameter of the circle is the swash tilt
angle, which can be set as desired.
If the swash direction is incorrect, it is possible to set the swash mix in a negative direction to achieve an
appropriate setting.
The setting value in this function should be between 0 to ± 125, but the practical range of useful values is 40-
70%. If the mixing amount is too much and you are not able to achieve the desired swash throw, adjust the servo
horn hole position outwards to allow more throw.
▋ Caution Note
Actually operate the servos and carefully confirmall settings before flight.
Function List
Helicopter
E-Ring Function
Exponential Function
TIPS
Note: When setting up a helicopter with a flybarless unit, please follow the flybarless unit manufacturers instruc-
tions regarding swash type and swash mix settings. EXP and the e-ring function should not be used.