JR ProPo C.O.L.T., Operation Manual

Page: 23 / 82

22
ᴾ
▋ Sub Trim【SUB TRIM】
▋ Function Explanation
This allows fine trimming of the servos attached to each channel. This trim should be used as
a fine adjustment when the servo horn mounting angle is not 90 degrees with regard to the
linkage. Note that if large amounts of sub trim are used, it will affect the maximum deflection of
the servo. It is therefore recommended to use only small values here.
▋ Setting Method
Rotate the dial to move to and select the channel that you wish to set (inverse display). Then
press the dial to display the setting box, and carry out the numerical value setting.
※ The channel names on the screen will differ according to the model type.
▋ Caution Note
Operate the servos and carefully confirm the control surfaces move as expected before flying.
As noted above, this function is a fine tuning function to adjust the servo neutral. It is highly recommended to
adjust the neutral as much as possible using the linkages and servo horn positions.
Note that Swash type or Wing type settings may change the channel indications.
• Swash type【SWASH TYPE】 ・・・・・ Page 64
• Wing Type【WING TYPE】 ・・・・・・ Page 65
Function List
Helicopter
Airplane
Glider
Select Channel
Helicopter mode shown on the screen
Amount for Sub-Trim