JR ProPo C.O.L.T., Operation Manual

Page: 24 / 82

23
ᴾ
▋ Reverse Switch【REVERSE SW】
▋ Function Explanation
This function reverses the servo operating direction (pulse change direction) of each channel.
▋ Setting Method
Rotate the dial to move to and select the channel that you wish to change (inverse display). Then
press the dial to select the rotation direction. “NORM” is the normal direction and “REV” is the
reverse direction. Actually operate the servos and carefully confirm the settings before flying.
※ The channel names on the screen will differ according to the model type selected.
Carefully note that the Reverse switch position will affect the final output value of the signals - therefore, it will
affect servo movement direction even if the channel is inhibited when used as part of a control mix.
Note that Swash type or Wing type settings may change the channel indications.
• Swash type【SWASH TYPE】 ・・・・・ Page 64
• Wing Type【WING TYPE】 ・・・・・・ Page 65
Function List
Helicopter
Airplane
Glider
Select Channel
TIPS
ᵧᵫᵮᵭᵰᵲᵟᵬᵲᴾᵬᵭᵲᵧᵡᵣ
In the situation where the reverse switch setting is
changed after the Fail Safe has been set, the failsafe
will operate incorrectly. Therefore, in the situation
where the Fail Safe is operated after the throttle
channel has been set to reverse, the servo will be
move to the Full High position, which is extremely
dangerous. After finalizing the transmitter settings, be sure to confirm and re-do as necessary the Fail
Safe settings (match the stick to the position that
you wish to set and press the Memory key), and
be certain to carry out operation confirmation By
switching off the transmitter, and checking whether
the servos move to the correct position.