JR ProPo C.O.L.T., Operation Manual

Page: 22 / 82

21
ᴾ
▋ Travel adjust【TRAVEL ADJUST】
▋ Function Explanation
This function allows independent adjustment of servo left/right (or up/down) movement, for
each channel. The adjustment is carried out with reference to the neutral position. Adjustment is
possible over an adjustment range between 0 and 150% in each directions. The default value is
100%, and this gives standard servo movement.
▋ Setting Method
Rotate the dial to move to, and select, the channel that you wish to set (inverse display). Then
press the dial to display the setting box, and now change the numeric values by rotating the dial.
※ The channel names on the screen will differ according to the model type.
By moving the appropriate control stick, the numerical values can be independently changed for left and right
(up and down), so that the control surface travel can be individually adjusted. When the cursor is at the inverse
display, the setting values can be modified. The values can be reset to default values by pressing the dial for three
(3) seconds.
▋ Caution Note
Operate the servos and carefully confirm the control surfaces move as expected before flying.
Note that Swash type or Wing type settings may change the channel indications.
• Swash type【SWASH TYPE】 ・・・・・ Page 64
• Wing Type【WING TYPE】 ・・・・・・ Page 65
Function List
Helicopter
Airplane
Glider
Travel for each right and left.
Select the channel.
This screen is for Helicopter type.
TIPS