JR ProPo C.O.L.T., Operation Manual

Page: 31 / 82

30
ᴾ
▋ Gyro Sensitivity【GYRO SENS】
▋ Function Explanation
▋ Setting Method
Select the switch for changing the gyro sensitivity either manually or "AUTO" and move the cursor to each
position to input the numerical sensitivity value on the display. If “AUTO” is selected, individual sensitivity
switching for each flight mode will be applied.
(”AUTO” appry only HELI type.)
Selection of Sensitivity
Select either Normal Mode or Tail Lock Mode.
Switch for Gyro Sensitivity (SW)
Under manual operation, select either Flight Mode (F.MOD SW) or Hold Switch (HOLD SW) Under auto operation,
depending on the flight mode switch, Select "AUTO".
Gyro sensitivity Switching delay (DELAY)
To avoid excessive servo hunting when switching the gyro sensitivity from a low sensitivity to higher sensitivity
setting, (when changing to a flight mode with lower rpm, but the blade rpm is not yet stable) it is possible to set a
delay on this function.
Note: During switching, the time will be delayed only when switching to a higher sensitivity.
Trim Input Function (TRIM IN)
Gyro sensitivity can be input by
the rudder trim lever. By setting
this function it is easy to adjust the
sensitivity using the rudder trim
lever during flight.
Gyro Sensitivity adjustment often
consists of two parts as shown in
the diagram. Read the instructions
with your Gyro unit and become
familiar with correct operation.
Select the Gyro Sensitivity to suit
with your application.
Concerning Trim Input, it is possible
to adjust the Gyro sensitivity value
using the rudder trim lever, which is
a very useful function for setting the
sensitivity during flight.
▋ Caution Note
Be sure to understand your Gyro manual to allow correct use of this function.
Carefully check the direction of the tail servo and be sure that everything works correctly before flight.
Function List
Helicopter
TRIM INPUT Function (TRIM IN)
GYRO SENS with delay (DELAY)
Switch for GYRO SENS (SW)
Selection of Sensitivity
N : Normal Mode
T : Tail Lock Mode
Gyro gain value and actual output value
2,100 [
ȝVHF
]
900 [
ȝVHF
]
1,100 [
ȝVHF
] 1,500 [
ȝVHF
] 1,900 [
ȝVHF
]
TRAVEL ADJUST -150% -100% +100% +150%
【N】Normal mode
Usable Gain area
【N】Normal mode
Usable Gain area
【T】Tail lock mode
Usable Gain area
【T】Tail lock mode
Usable Gain area
Higher Higher Higher Higher
Higher Higher
Lower Lower Lower Lower
Lower Lower
±0%
Normal Mode
NORMAL
Tail Lock Mode
T.LOCK
Usable gain area Usable gain area
0% 50% 100% 125%
0% 0% 50% 100% 150% 100% 50% 150%
TIPS
HELI Type : It is possible to adjust the Gyro sensitivity by using the gear channel (GEAR). The sensitivity can be adjustable
manually selecting for each Flight mode or Hold Switch, or can be set using the "AUTO" function. There are two gyro
sensitivity modes available - “NORMAL” and Tail Lock (T.LOCK) - choose the type depending on your application.
Airplane Type : It is possible to adjust the Gyro sensitivity by using the gear or flap channel (GEAR/FLAP). The
sensitivity can be adjustable manually selecting for Switch. There are two gyro sensitivity modes available - “NORMAL”
and Tail Lock (T.LOCK) - choose the type depending on your application.
Airplane
※HELI Type only
※HELI Type
※HELI Type only