83
——Loose and remove the remaining four M8 lock nuts.
——Remove the intake manifold.
——Remove the intake manifold sealing gasket.
——Remove six studs with equal length using two M8 nuts.
Assembly: ——Apply lotite sealant 201 on the cylinder head bolt threads and screw six studs into the
cylinder head.
——Assemble the new sealing gasket onto the studs.
——Install the intake manifold assembly.
——Install the front lifting lug onto the right two studs.
——Finger screw in nuts and tighten to16-20Nm.
Fig.130
Fig.131
